[shortdesc]
- Switch
- L3
- 24 x 10/100/1000 + 4 x 10 Gigabit SFP+ (uplink)
- Rack-mountable
[/shortdesc]
[properties]
| Properties |
C9200L-24T-4X-E |
| Description |
Catalyst 9200L 24-port Data 4x10G uplink Switch, Network Essentials |
| Product Family |
Catalyst 9200-L |
| Product Type |
Ethernet Switch |
| Number of Ports |
24 |
Downlinks total 10/100/1000
or PoE+ copper ports |
24 ports data |
| Uplink configuration |
4x 1/10G fixed uplinks |
| Cisco IOS Software |
Network Essentials |
Default primary AC
power supply |
PWR-C5-125WAC |
Available PoE power with
additional secondary
power supply |
‚ - |
| Fans |
Fixed redundant |
Chassis + FEP +
‚ Fan Dimensions (HxWxD) Inches |
1.73 x 17.5 x 11.3 |
[/properties]
[specifications]
| Specifications |
C9200L-24T-4X-E |
| Console Ports |
RJ-45-to-DB9 cable for PC connections, USB-C adaptor, USB adaptor |
| DRAM |
2 GB |
| Flash Memory |
4 GB |
| Switching capacity |
128 Gbps |
| Forwarding rate‚ |
95.23 Mbpps |
| MAC addresses |
16000 |
Operating Temperature
Up to 5,000 ft (1500 m) |
-5°C to +45°C |
Operating Temperature
Up to 10,000 ft (3000 m) |
-5°C to +40°C |
| Safety |
IEC 60950-1
UL 60950-1
CAN/CSA C22.2 No. 60950-1
EN 60950-1
AS/NZS 60950.1
Class I Equipment |
Electromagnetic compatibility
certifications |
47 CFR Part 15
CISPR 32 Class A
CNS 13438
EN 300 386*
EN 55032 Class A
EN61000-3-2
EN61000-3-3
ICES-003 Class A
KN 32
TCVN 7189 Class A
V-3 Class A
CISPR 35
EN 300 386*
EN 55035
KN 35
TCVN 7317 |
EMC
compliance |
FCC Part 15 (CFR 47) Class A
ICES-003 Class A
EN 55032 Class A
CISPR 32 Class A
AS/NZS 3548 Class A
BSMI Class A
VCCI Class A
CISPR 35
EN 55035, EN300 386*
EN 61000-3-2, EN 61000-3-3 |
Safety
compliance |
UL 60950-1, CAN/CSA-C22.2 No. 60950-1, EN 60950-1, IEC 60950-1, CCC, CE Marking |
| Environmental |
Reduction of Hazardous Substances (ROHS) 5 |
[/specifications]
[accesories]
| Stacking Support |
StackWise-80 |
| Stacking bandwidth support |
80 Gbps |
| Stacking hardware‚ |
C9200L-STACK-KIT |
Number of
members |
8 |
| Supported stack members |
Other C9200L models with same license level |
|
|
| Stacking accessories |
|
| C9200L-STACK-KIT |
Stack kit for C9200L SKUs only: Two data stack adapters and one data stack cable |
| STACK-T4-50CM |
Data stack 50 cm cable (default cable with Stack Kit) |
| STACK-T4-1M |
Data stack 1 m cable |
| STACK T4-3M |
Data stack 3 m cable |
|
|
| Mounting Accessories |
|
| ACC-KIT-T1= |
Accessory kit with 19 inch Type 1 rack mount |
| RACK-KIT-T1= |
19, 23, 24 inch and ETSI Type 1 rack mount kit |
| 4PT-KIT-T2= |
4 Point rack mount kit New |
| C9K-MGNT-TRAY |
Magnet and Mounting Tray for compact switches |
| C9K-CMPCT-DIN-MNT |
DIN Rail Mount for compact switches |
| RACKMNT-19-CMPACT |
19-Inch Rack Mounting Brackets for compact switches |
| C9K-CMPCT-CBLE-GRD |
Cable guard for compact switches (for C9K-WALL-TRAY) |
| C9K-WALL-TRAY |
Wall mount bracket for compact switches |
| C9K-CMPCT-DESK-MNT |
Under desk mount for compact switches |
[/accesories]
Technical Details
The Cisco Catalyst C9200L-24T-4X-E is a Layer 3 managed 1U rackmount switch with 24 Gigabit (10/100/1000) data ports and four fixed 1/10G SFP+ uplinks, running Cisco IOS XE with the Network Essentials license. It carries no Power over Ethernet, so all 24 access ports are data-only. Its switching capacity is 128 Gbps and its forwarding rate is 95.23 Mpps. It stacks with other Catalyst 9200L switches over Cisco StackWise-80 at 80 Gbps. The switch connects campus and branch access-layer endpoints such as desktops, printers, and wired IoT devices.
Overview
The Cisco Catalyst C9200L-24T-4X-E is a fixed-configuration, 24-port data access switch in the Cisco Catalyst 9200L series.
The Catalyst 9200L series uses fixed uplinks, fixed redundant fans, and Cisco StackWise-80 stacking, and runs Cisco IOS XE on the Cisco UADP 2.0 Mini ASIC. With the Network Essentials license, the C9200L-24T-4X-E supports Layer 2 switching and routed access — static routing, RIP, EIGRP stub, OSPF up to 1,000 routes, Policy-Based Routing, PIM stub multicast, VRRP, 802.1X, and MACsec-128 encryption.
Cisco positions the Catalyst 9200L as the successor to the end-of-sale Catalyst 2960-X and 2960-XR access switches.
Best For
The Cisco C9200L-24T-4X-E suits campus and branch access-layer deployments that connect data-only endpoints — desktops, printers, and wired IoT devices — and need 10G uplinks to an aggregation or core layer. Its four fixed 1/10G SFP+ uplinks and Network Essentials license make it suitable where 10 Gigabit uplinks and the base feature set (Layer 2 plus routed access) are sufficient. It stacks with other Catalyst 9200L switches over StackWise-80 for unified management as the access layer grows.
Not suitable if:
- You need PoE to power wireless access points, IP phones, or IP cameras.
- You need more than 24 access ports.
- You need advanced Layer 3 routing (full OSPF/EIGRP, IS-IS) or segmentation (VRF, SGT).
- You need multigigabit (mGig) access ports above 1 Gbps.
- You need 25G uplinks.
Part Number Decode
-
C9200L indicates the fixed-uplink platform within the Cisco Catalyst 9200 Series.
-
24T indicates 24 Gigabit (10/100/1000) data access ports with no Power over Ethernet.
-
4X indicates four fixed 1/10G SFP+ uplinks; each slot accepts a 1G SFP or a 10G SFP+ optic.
-
-E indicates the perpetual Network Essentials license.
