WS-C2960X-24PSQ-L Specification
|
| Enclosure type |
Rack-mountable - 1U |
| Ports |
24 x 10/100/1000 + 2 x 1G SFP + 2 10/100/1000BT |
| Network management Interface |
10/100 Mbps Ethernet (RJ-45) |
| Available PoE Power |
110W |
| Forwarding bandwidth(Gbps) |
108Gbps |
| Maximum stacking number |
None |
| Stack Bandwidth |
None |
| Forwarding Performance |
71.4Mpps |
| Switching bandwidth |
216Gbps |
| Maximum active VLANs |
1023 |
| MAC Address Table Size |
16K (default) |
| CPU |
APM86392 600MHz dual core |
| RAM |
256 MB |
| Flash Memory |
64 MB |
| Status Indicators |
Per-port status: Link integrity, disabled, activity,
speed, and full duplex System status: System, RPS,
Stack link status, link duplex, PoE, and link speed
|
| Console ports |
USB (Type-B), Ethernet (RJ-45) |
| Stacking cable |
None |
| Power Redundancy |
Option (PWR-RPS2300) |
| Voltage range (Auto) |
110V-240V |
| Power Consumption Operational |
0.16KVA |
| Width |
17.5 Inches (44.5 cm) |
| Depth |
11.03 Inches (28 cm) |
| Height |
1.73 Inches (4.45 cm) |
| Weight |
12.8 Pounds (5.8 Kg) |
| Rack Mounting Kit |
optional |
| MTBF in hours |
462,680 |
| Compliant Standards |
● IEEE 802.1D Spanning Tree Protocol ● IEEE 802.1p CoS Prioritization ● IEEE 802.1Q VLAN ● IEEE 802.1s ● IEEE 802.1w ● IEEE 802.1X ● IEEE 802.1ab (LLDP) ● IEEE 802.3ad ● IEEE 802.3af and IEEE 802.3at ● IEEE 802.3ah (100BASE-X single/multimode fiber only) ● IEEE 802.3x full duplex on 10BASE-T, 100BASE-TX, and
1000BASE-T ports● IEEE 802.3 10BASE-T
● IEEE 802.3u 100BASE-TX ● IEEE 802.3ab 1000BASE-T ● IEEE 802.3z 1000BASE-X ● RMON I and II standards ● SNMP v1, v2c, and v3 ● IEEE 802.3az ● IEEE 802.1ax
|
| System software |
IOS LAN BASE |
| license |
NERGY-MGT-100-K9, EW-DO-100-DE |
| features |
●Jumbo Frames ●VLANS ●Voice Vlan ●VTPv2 ●CDPv2
●LLDP ●802.3ad LACP ●PVST/PVST+ ●802.1W/802.1S
●Port Fast/Uplink Fast ●port CoS Trust and Override
●Scheduling ●Priority Queuing ●Configure CoS Priority Queues
●Weighted Tail Drop ●DSCP transparency
|
| Network security |
●SSH, SSL and SCP●RADIUS and TACACS+●SNMPv3 crypto
●802.1x●802.1x Accounting / MIB●802.1x w/ port security
●802.1x w/Voice VLAN●802.1x Guest VLAN●802.1x VLAN assignment
●802.1x MAC-Auth Bypass●BPDU/Root Guard●Port Security
●Private VALN Edge●Storm Control●Block unknown unicast and multicast
●IGMP Snooping●IGMP Filter/Throttle
|
| Management and Troubleshooting |
●Auto-MDOX●TDR●UDLD●IP SLA Responder●layer 2 / IP Traceroute
●SPAN●RSPAN●Express Setup●Device Manager
●Cisco Network Assistant●Smartports + Advisor●Troubleshooting Advisor
●Drag-and-drop Cisco IOS Upgrade●IP Address DHCP
●Autoinstall with saved configuration●Configuration Replace
●DHCP Auto Image Upgrade●DHCP Port Based Allocation●Error Disable MIB
|
| Operating temperature up to 5000 ft (1500 m) |
23ºF to 113ºF(-5ºC to 45ºC) |
| Operating temperature up to 10,000 ft (3000 m) |
23ºF to 104ºF(-5ºC to 40ºC) |
| Short-term exception at sea level |
23ºF to 131ºF(-5ºC to 55ºC) |
| Short-term exception up to 5000 feet (1500 m) |
23ºF to 122ºF(-5ºC to 50ºC) |
| Short-term exception up to 10,000 feet (3000 m) |
23ºF to 113ºF(-5ºC to 45ºC) |
| Short-term exception up to 13,000 feet (4000 m) |
23º to 104ºF(-5ºC to 40ºC) |
| Storage temperature up to 15,000 feet (4573 m) |
-13º to 158ºF(-25º to 70ºC) |
| Operating altitude |
Up to 10,000 Feet(Up to 3000 Meters) |
| Storage altitude |
Up to 13,000(Up to 4000 Meters) |
| Operating relative humidity |
10% to 95% noncondensing |
| Storage relative humidity |
10% to 95% noncondensing |