Secure & Protected • Purchase Orders Accepted
Genuine Products • Guaranteed Compatibility
Description
- (1) Intel 4th/5th Generation XEON Processors
- (16) DDR5 - Max Memory 128 GB
- (2) PCIe5 x16 (16, 8, 4, 1)
- (1) OCP slot
- Supports up to (12 LFF or 10 SFF or 8 EDSFF) Drives
- Optional RAID 1 NVMe M.2 Boot device
- Embedded Broadcom BCM5720 Ethernet 1Gb 2-port BASE-T Adapter
- HPE iLO 6 ASIC & TPM 2.0
- (2) GPU Supported
(Click to View)
- AI
- Edge Servers
The HPE ProLiant DL320 Gen11 is a 1U 1P server with a unique compact design and workload-driven modular design that is purpose-built for edge computing delivering exceptional performance at 1P economics and an excellent choice for both virtualized and containerized workloads.
DL320 G11 4x 3.5" P52765-B21
DL320 G11 12x 3.5P52767-B21
DL320 G11 8+2 2.5" SAS/SATA/NVMeP52766-B21
DL320 G11 GPU ChassisP61218-B21
4x 3.5" OptionsP48928-B21 - LFF DisplayPort/USB Kit
8x 2.5" OptionsP52743-B21 - 8SFF x1 Tri-Mode 24G
P52747-B21 - 8SFF x4 Tri-Mode 24G
P52751-B21 - 2SFF x4 Tri-Mode 24G
OR
P48926-B21 - DisplayPort/USB/Optical Drive Blank Kit
GPU CTO OptionsP61219-B21 - 8xEDSFF x4 NVMe Drive Cage Kit
P61221-B21 - 4xSFF x4 Tri-Mode 24G U.3 BC Drive Cage Kit
Notes
- DA = Direct Attached
- P52743-B21 - DA supports 8 SATA Drives only
- P52747-B21 - DA supports 8 NVMe U.3 Drives only
- P52751-B21 - DA supports either 2x NVMe U.3 drives or SATA drives.
- P61219-B21 - DA supports up to 4 EDSFF drives only
- P61221-B21 - DA supports up to 4 NVMe U.3 drives only.
- P62181-B21 - If 8EDSFF or 4SFF Drive cage is selected and MR416i-p is not selected, then "HPE DL320 G11 GPU 4xDC NVMe FIO Kit" must be selected.
Cannot be selected if MR416i-p controller is selected - There are tons of rules and cable kit information in the manuals. Please open the manuals above to few all the detailed information.
Standard Heatsink (STD)P48904-B21
Performance Heat SinkP52756-B21
High Performance FanP48908-B21
Notes
- P52756-B21 & P48908-B21 - TDP > 185W Processors or NVMe Drives
- If GPU CTO Model is selected, then Performance Heatsink must be selected
- P48907-B21 - 5 Fans
- P48908-B21 - 7 Fans
- P54697-B21 - 2 Fans
HPE NS204i-u Boot Device is an optional front-panel PCIe 5.0 module for the DL320 Gen11 with two hot-pluggable 2280 M.2 NVMe SSDs. It delivers dedicated hardware RAID 1 boot mirroring that auto-creates the volume at boot and supports Windows, Linux, and VMware via native drivers.
Requirements: N204i-u Boot device includes 2x 480GB M.2 NVMe SSDs, with pre-configured hardware RAID1. Server must use high performance fan kit when supporting NS204i-u for all CTO Configs. The specific cables needed to connect the NS204i-u in the DL320 Gen11 (P52786-B21)
Riser Assembly
Primary Riser installed by default (Slot 1)
P52753-B21 -Secondary Riser - 2x PCIe Gen5 x16 FHHL
Riser GPU
P62181-B21 - Supports 4x SW GPUs
P62197-B21 - Supports 2x DW GPUs
Max 2 of PCIe and OROC internal controllers can be selected per server.
Both Risers are Supported in the GPU CTO
If Full Length GPUS are installed the rear PCIe slots will support LP Adapters.
NVIDIA L4 24GBS0K89
- 24 GB GDDR6
- 72 W TDP
- SW FH/FL
- 4.0 x16
NVIDIA A16 64GBR8T26C
- 64 GB GDDR6
- 250 W TDP
- DW LP
- 4.0 x16
NVIDIA L40 48GBS0K90C
- 48 GB GDDR6
- 300 W TDP
- DW
- 4.0 x16
NVIDIA L40S 48GBS2L70C
- 48 GB GDDR6
- 350 W TDP
- DW
- 4.0 x16
Notes:
- Cannot mix Doublewide and Singlewide GPU.
- P62181-B21 - Allows installation and proper operation of 4 GPUs in the front GPU cage.
- P62197-B21 - Allows installation and proper operation of 2 GPUs (typically double-wide cards) in the front GPU cage.
HPE iLO 6 is the 6th-generation Integrated Lights-Out management processor built into HPE ProLiant Gen11 servers (including the DL320 Gen11).
It delivers secure out-of-band remote management, allowing you to monitor, control, and troubleshoot the server even when the OS is down or the server is powered off.
Key features include a hardware Silicon Root of Trust, enhanced security (secure boot, attestation), Redfish-compliant RESTful API, improved remote console, virtual media, and seamless integration with HPE Compute Ops Management and OneView.
1. The GPU CTO chassis supports either 4x single-wide GPUs or 2x double-wide GPUs — these configurations cannot be mixed.
2. High Performance Fan Kit is recommended when installing GPUs..
3. When using GPUs in the front cage, rear PCIe slots become more limited due to power and thermal constraints.
4. The Standard chassis uses rear PCIe risers. The GPU CTO chassis uses a front GPU cage instead.
5. Not all storage controllers and networking cards are available in both PCIe (-p) and OCP (-o) versions.
6. Some configurations may require specific cable kits depending on the drive backplane and controller chosen.
Product
We always aim for make sure our customers love our products, but if you do need to return an order, we’re happy to help. Just email us directly and we’ll take you through the process.
Other
You can contact us through our contact page! We will be happy to assist you.
Any question?
If we still haven't answered your question, you can contact us below and we will get back to you as soon as possible.