[shortdesc]
- Catalyst 9200L
- 24-port 8 x mGig, 16 x 1G, 2 x 25G PoE+
- DNA‚ Essentials
[/shortdesc]
[properties]
| Properties |
C9200L-24PXG-2Y-E |
| Description |
Catalyst 9200L 24-port 8xmGig, 16x1G, 2x25G, PoE+, Network Essentials |
| Product Family |
Catalyst 9200-L |
| Product Type |
Ethernet Switch |
| Number of Ports |
24 |
Downlinks total 10/100/1000
or PoE+ copper ports |
24 ports full PoE+ (8 mGig ports up to 10G, 16 ports up to 1G) |
| Uplink configuration |
2x 1/10/25G fixed uplinks |
| Cisco IOS Software |
Network Essentials |
Default primary AC
power supply |
PWR-C5-600WAC |
Available PoE power with
additional secondary
power supply |
740W |
| Fans |
FRU redundant |
Chassis + FEP +
‚ Fan Dimensions (HxWxD) Inches |
1.73 x 17.5 x 15.4 |
[/properties][specifications]
| Specifications |
C9200L-24PXG-2Y-E |
| Console Ports |
RJ-45-to-DB9 cable for PC connections, USB-C adaptor, USB adaptor |
| DRAM |
2 GB |
| Flash Memory |
4 GB |
| Switching capacity |
292 Gbps |
| Forwarding rate‚ |
229.16 Mpps |
| MAC addresses |
16000 |
Operating Temperature
Up to 5,000 ft (1500 m) |
-5°C to +45°C |
Operating Temperature
Up to 10,000 ft (3000 m) |
-5°C to +40°C |
| Safety |
IEC 60950-1
UL 60950-1
CAN/CSA C22.2 No. 60950-1
EN 60950-1
AS/NZS 60950.1
Class I Equipment |
Electromagnetic compatibility
certifications |
47 CFR Part 15
CISPR 32 Class A
CNS 13438
EN 300 386*
EN 55032 Class A
EN61000-3-2
EN61000-3-3
ICES-003 Class A
KN 32
TCVN 7189 Class A
V-3 Class A
CISPR 35
EN 300 386*
EN 55035
KN 35
TCVN 7317 |
EMC
compliance |
FCC Part 15 (CFR 47) Class A
ICES-003 Class A
EN 55032 Class A
CISPR 32 Class A
AS/NZS 3548 Class A
BSMI Class A
VCCI Class A
CISPR 35
EN 55035, EN300 386*
EN 61000-3-2, EN 61000-3-3 |
Safety
compliance |
UL 60950-1, CAN/CSA-C22.2 No. 60950-1, EN 60950-1, IEC 60950-1, CCC, CE Marking |
| Environmental |
Reduction of Hazardous Substances (ROHS) 5 |
[/specifications][accesories]
| Stacking Support |
StackWise-80 |
| Stacking bandwidth support |
80 Gbps |
| Stacking hardware‚ |
C9200L-STACK-KIT |
Number of
members |
8 |
| Supported stack members |
Other C9200L models with same license level |
|
|
| Stacking accessories |
|
| C9200L-STACK-KIT |
Stack kit for C9200L SKUs only: Two data stack adapters and one data stack cable |
| STACK-T4-50CM |
Data stack 50 cm cable (default cable with Stack Kit) |
| STACK-T4-1M |
Data stack 1 m cable |
| STACK T4-3M |
Data stack 3 m cable |
|
|
| Mounting Accessories |
|
| ACC-KIT-T1= |
Accessory kit with 19 inch Type 1 rack mount |
| RACK-KIT-T1= |
19, 23, 24 inch and ETSI Type 1 rack mount kit |
| 4PT-KIT-T2= |
4 Point rack mount kit New |
| C9K-MGNT-TRAY |
Magnet and Mounting Tray for compact switches |
| C9K-CMPCT-DIN-MNT |
DIN Rail Mount for compact switches |
| RACKMNT-19-CMPACT |
19-Inch Rack Mounting Brackets for compact switches |
| C9K-CMPCT-CBLE-GRD |
Cable guard for compact switches (for C9K-WALL-TRAY) |
| C9K-WALL-TRAY |
Wall mount bracket for compact switches |
| C9K-CMPCT-DESK-MNT |
Under desk mount for compact switches |
[/accesories]
Technical Details
The Cisco Catalyst C9200L-24PXG-2Y-E is a Layer 3 managed 1U rackmount multigigabit switch with 24 PoE+ access ports, 8 of which are multigigabit ports (up to 10G) and 16 of which are 1G, plus two fixed 25G SFP28 uplinks, running Cisco IOS XE with the Network Essentials license. It provides a 370 W PoE+ budget, expandable to 740 W with a second power supply, to power devices such as wireless access points, IP phones, and IP cameras. Its switching capacity is 292 Gbps and its forwarding rate is 229.16 Mpps. It stacks with other Catalyst 9200L switches over Cisco StackWise-80 at 80 Gbps.
Overview
The Cisco Catalyst C9200L-24PXG-2Y-E is a fixed-configuration, 24-port multigigabit PoE+ access switch in the Cisco Catalyst 9200L series.
The Catalyst 9200L series uses fixed uplinks, fixed redundant fans, and Cisco StackWise-80 stacking, and runs Cisco IOS XE on the Cisco UADP 2.0 Mini ASIC. The C9200L-24PXG-2Y-E combines 8 multigigabit access ports (100 Mbps to 10 Gbps) with 16 Gigabit ports and two 25G SFP28 uplinks. With the Network Essentials license, it supports Layer 2 switching and routed access, including static routing, RIP, EIGRP stub, OSPF up to 1,000 routes, Policy-Based Routing, PIM stub multicast, VRRP, 802.1X, and MACsec-128 encryption.
Cisco positions the Catalyst 9200L as the successor to the end-of-sale Catalyst 2960-X and 2960-XR access switches.
Best For
The Cisco C9200L-24PXG-2Y-E suits access-layer deployments that need multigigabit ports for Wi-Fi 6, 6E, and 7 access points and other devices that exceed 1 Gbps, alongside standard Gigabit endpoints. Its 8 multigigabit ports support 100 Mbps to 10 Gbps over existing copper cabling, its 16 Gigabit ports serve standard endpoints, and its two 25G SFP28 uplinks connect to an aggregation or core layer. Its 370 W PoE+ budget (740 W with a second power supply) powers wireless access points, IP phones, and IP cameras; actual device counts depend on each powered device's power draw.
Not suitable if:
- You need more than 24 access ports.
- You need more than 8 multigigabit ports.
- You need advanced Layer 3 routing (full OSPF/EIGRP, IS-IS) or segmentation (VRF, SGT).
- You need 40G or 100G uplinks (the uplinks are 25G SFP28).
- You do not need multigigabit ports (a standard Gigabit PoE+ model covers a 1G-only access layer).
Technical Details
The Cisco Catalyst C9200L-24PXG-2Y-E is a Layer 3 managed 1U rackmount multigigabit switch with 24 PoE+ access ports, 8 of which are multigigabit ports (up to 10G) and 16 of which are 1G, plus two fixed 25G SFP28 uplinks, running Cisco IOS XE with the Network Essentials license. It provides a 370 W PoE+ budget, expandable to 740 W with a second power supply, to power devices such as wireless access points, IP phones, and IP cameras. Its switching capacity is 292 Gbps and its forwarding rate is 229.16 Mpps. It stacks with other Catalyst 9200L switches over Cisco StackWise-80 at 80 Gbps.
Overview
The Cisco Catalyst C9200L-24PXG-2Y-E is a fixed-configuration, 24-port multigigabit PoE+ access switch in the Cisco Catalyst 9200L series.
The Catalyst 9200L series uses fixed uplinks, fixed redundant fans, and Cisco StackWise-80 stacking, and runs Cisco IOS XE on the Cisco UADP 2.0 Mini ASIC. The C9200L-24PXG-2Y-E combines 8 multigigabit access ports (100 Mbps to 10 Gbps) with 16 Gigabit ports and two 25G SFP28 uplinks. With the Network Essentials license, it supports Layer 2 switching and routed access, including static routing, RIP, EIGRP stub, OSPF up to 1,000 routes, Policy-Based Routing, PIM stub multicast, VRRP, 802.1X, and MACsec-128 encryption.
Cisco positions the Catalyst 9200L as the successor to the end-of-sale Catalyst 2960-X and 2960-XR access switches.
Best For
The Cisco C9200L-24PXG-2Y-E suits access-layer deployments that need multigigabit ports for Wi-Fi 6, 6E, and 7 access points and other devices that exceed 1 Gbps, alongside standard Gigabit endpoints. Its 8 multigigabit ports support 100 Mbps to 10 Gbps over existing copper cabling, its 16 Gigabit ports serve standard endpoints, and its two 25G SFP28 uplinks connect to an aggregation or core layer. Its 370 W PoE+ budget (740 W with a second power supply) powers wireless access points, IP phones, and IP cameras; actual device counts depend on each powered device's power draw.
Not suitable if:
- You need more than 24 access ports.
- You need more than 8 multigigabit ports.
- You need advanced Layer 3 routing (full OSPF/EIGRP, IS-IS) or segmentation (VRF, SGT).
- You need 40G or 100G uplinks (the uplinks are 25G SFP28).
- You do not need multigigabit ports (a standard Gigabit PoE+ model covers a 1G-only access layer).
